How To Clean Burn Marks On Glass Top Stove

Deb asked: "I accidentally laid a loaf of bread on ane of my glasstop stove burners. I removed near of the burnt plastic just in that location is still some blackness residuum. I have scrubbed with a stove cleaner. Any ideas??"

In that location are a grand different renditions of this story. Whether it'southward a bread pocketbook, Ziploc, plastic lid or a container, they all end with the plastic and glass cook meridian quickly becoming ane. Before you tin blink, y'all are left with a hard stone of molten plastic that seems to be permanently fused to the burner. Most manufacturers consider this irreversible damage, but there are some methods you can take to remove the melted, burnt plastic. Information technology will accept some time and hard work, only in comparison to purchasing a new stove meridian, it's well worth information technology.

You Will Demand:

Spoon or dull knife
WD-40 (or olive oil)
Acetone nail polish remover
Razor blades (or plastic scraper)
Blistering soda
Soft fabric
Water
Mild soap

Steps to Remove the Plastic:

Start by allowing the burner to absurd completely earlier attempting to remove anything. Trying to clean a hot burner is unsafe and invites further burns and problems. Burning plastic produces a horrendous smell – open all the windows and ventilate the area well.
When the burner and plastic take cooled completely, peel abroad as much of the plastic equally possible.
Use the spoon or wearisome knife, such as a butter knife to gently scrape abroad the plastic. Use caution not to scratch the drinking glass surface of the stove.
Spray the remaining plastic with WD-40 and let it gear up for a few minutes. Ane site user (Thank you Mira!) used olive oil instead of WD-xl and had success.
Now there are 2 choices of what you can practise:
1. Use a razor bract or plastic scraper like a spatula to carefully scrape the plastic off. Keeping the razor as flat every bit possible, gently push it into the plastic. Be careful not to scratch the surface!
2. If you're not comfortable using a scraper, one of our site users (Thank you!) suggests sprinkling baking soda over the WD-40, letting it sit for a few minutes, then using a cloth to scrub off the plastic. The baking soda acts as a balmy annoying, assuasive you to scrub more efficiently.
Echo as necessary until most of the plastic is removed.
When a majority of the plastic is removed (and there are no longer edges for the razor blade to catch on), you may want to try smash polish remover to go rid of the last layer.
Use a cotton brawl or soft cloth to apply the acetone nail polish remover. This evaporates apace and so you will need to reapply often to keep the area well moistened.
Scrub with a plastic or other glass safe scrubber in a circular motion to remove the terminal $.25.
When all of the plastic is removed, make clean the area with balmy soap and warm water to remove any remaining cleaning fluids from the melt top. This is especially of import due to the flammibility of WD-40.

Additional Tips and Ideas

Always employ caution when working with razor blades and WD-forty. While the spray helps to loosen the burnt plastic, it can besides make a slippery piece of work surface!
There are special cleaning creams designed for cleaning cooked on messes from glass stovetops. They are available at most department and dwelling house improvement stores.
Don't have the above materials? Try laundry stain spray, kitchen cleaner, Windex or Mr. Clean Magic Eraser instead. Keep in mind that you lot should never combine any cleaning chemicals though. To try more than ane, rinse the area thoroughly first and wash it with some mild soap.
One site user (Thanks!) recommends using plastic modeling gum to melt the plastic, such equally Revell brand mucilage. These glues cook plastic and so that information technology can fuse with some other piece of plastic to build the model. Once the plastic is melted, wipe it upwards with a soapy paper towel.
Some other site user (Thanks!) recommends sprinkling a thick layer of baking soda over the plastic, then pouring on some white vinegar. The combinarion will bubble and fizz immediately, and if non careful, can create an extra mess. However, this fizzing volition loosen the stuck plastic and is all natural. Scrape off the plastic once the fizzing calms.
If you're hesitant to use any chemicals, try placing an ice cube on the plastic to arrive breakable and and then scrape it off with razor blade. This works well for minor cases.
If the area smells of the burnt plastic, utilise the guide How to Remove Burnt Plastic Odors.